Compact line laser kit RED 50mW, IP65, water sealed, dust sealed
€348.67
Delivery time: In stock
Compact line laser kit RED 50mW, IP65, water sealed, dust sealed
Line Laser Kit 50 mW Red (650 nm), incl. mount – LLM-SET-50-650WP: Ready-to-use line laser kit that projects a red laser line—includes a matching adjustable mount in a waterproof IP65 housing. Focus and line position are adjustable.
- Red laser line (650 nm) with 50 mW
- Ready-to-use kit including an adjustable mount
- Adjustable focus and line position
- Waterproof IP65 housing
The laser diodes are equipped with ACC control for high stability, as well as a startup ramp that slowly increases the current when the device is turned on, protecting the diode from inrush spikes.
Set consists of
- Line laser module, fully calibrated and ready for use
- Matching adjustable mount
Electrical connection
230V version: The 230V version includes a power cable with a hollow connector and a matching plug-in power supply.
12–25V version: The laser modules are equipped with a flexible connection cable. If you select the 24V version, a small adapter is heat-shrunk onto the power cable. The ends are open and fitted with wire end ferrules, allowing them to be connected directly to an existing power supply or a busbar. Reverse-polarity protection is built-in.
Technical Specifications
| Laser power: | 50 mW |
| Wavelength: | 648–650 nm RED |
| beam angle: | 110° total |
| Line length after 1 m: | approx. 3 m |
| laser class: | 1/2 |
| 230 VAC connection: | Hollow connector + plug-in power supply, power cord approx. 2 m |
| 12–25 V connection: | Flexible cable with wire end ferrules, approx. 1 m |
| IP Rating: | IP 65 |
| Dimensions: | approx. 18 x 100 mm |
| Service life: | typically > 25,000 h when mounted on a metal mount |
| Temperature range: | -15° C – 45° C |
Installation and Line Length
The cylindrical housing, with a diameter of 18 mm, can be easily inserted into the included, adjustable mount. The line laser is clamped in place to prevent damage to the housing. At the same time, the heat generated—which is very low in these modules—is dissipated via the clamping mechanism onto a metal surface. The line position is easily adjusted by rotating the laser module in the mount. The sturdy aluminum mount can be adjusted and locked in pan and tilt positions. The mounting base also features a guide pin to ensure precise concentricity during the adjustment process. The mounting plate allows for attachment from both the front and the back via threaded inserts.
If the laser is mounted vertically above a work surface, the line length is determined by the distance and the projection angle. With angled mounting, the line length can increase significantly.
Notes
- Observe the laser class!
- Further information on laser safety can be found here.
- For continuous operation, the module must be mounted in the mount
We are happy to answer any questions you may have regarding classification in your specific environment.
| Mount: | Pan/Tilt magnetic mount, Strong Pan/Tilt |
|---|---|
| Source: | 12 - 25 VDC, 110 - 240 VAC, External battery source |
At a distance of 1 m, the following lengths result (12-mm modules):
| Angle | Distance | Line length approx. |
|---|---|---|
| 10° | 1 m | 17 cm |
| 20° | 1 m | 35 cm |
| 30° | 1 m | 54 cm |
| 35° | 1 m | 63 cm |
| 45° | 1 m | 83 cm |
| 60° | 1 m | 116 cm |
| 70° | 1 m | 140 cm |
| 90° | 1 m | 200 cm |
| 110° | 1 m | 300 cm |
The line length increases linearly with distance; at a distance of 2 m, these values double.
Stranded wires (standard) – open red/black wires, approx. 100–200 mm length, for direct connection to microcontrollers or driver boards.
Barrel connector – 5.5 / 2.1 mm standard barrel plug, approx. 200 mm cable, for operation with a 230 VAC plug-in power supply.
Flexible cable with ferrules – approx. 100 cm flexible cable for direct connection to a 12–25 VDC machine controller. Reverse-polarity protection is integrated in the DC variant.
On request we also supply M8 / M12 connectors with custom cable lengths. The DC variant is particularly suited for retrofitting existing machines without 230 V wiring.
Line length: The longer the line, the lower the brightness, as the light output is spread over a larger area
Laser color: Green appears significantly brighter than red or blue
Work surface: The darker and more matte the surface, the darker the light appears
Ambient brightness: The brighter the ambient light, the darker the laser line appears. This is due to the human eye, which reduces its sensitivity depending on the ambient brightness. In direct sunlight, it is very difficult to see a laser line because the retina is already saturated.
Laser power: The higher the laser power, the brighter the laser line
Wavelength in detail: The wavelength determines how visible the line is on your surface. Red (650 nm) is the lowest-cost option and sufficient in moderately lit indoor environments. Light red (635 nm) appears noticeably brighter than 650 nm at the same power. Green (520 / 532 nm) is the most universal choice – the human retina is most sensitive in the green spectral range, so green lines appear roughly 5–7× brighter than red at equal power. Blue (450 nm) delivers high contrast on greenish surfaces, where red and green fade into the background.