Go to homepage Go to homepage Go to homepage Go to homepage
€0.00
Menu
Skip image gallery
FloorPoint XT floor positioning laser green CROSS 120 mW
FloorPoint XT floor positioning laser green CROSS 120 mW

FloorPoint XT floor positioning laser green CROSS 120 mW

Cross angle: 55 deg
FPXT-120-520: The FloorPoint XT floor laser (120 mW, green) projects a green positioning crosshair onto industrial floors. Visible in daylight.

€691.39

Cross angle
Product number: FPXT-120-520.1
Description

FloorPoint XT floor positioning laser green CROSS 120 mW

FloorPoint XT Floor Laser 120 mW Green – FPXT-120-520: High-performance floor marking laser that projects a green crosshair onto industrial floors—clearly visible even in daylight. For guide lines, walkways, hazard zones, and parking space markings.

  • Green positioning cross (520 nm) with 120 mW
  • For permanent floor marking on industrial floors
  • Highly visible even in daylight

Technical Specifications

Laser power: 120 mW
Laser color: GREEN
Cross size: selectable
laser class: 1/2
Power supply: 230 VAC via plug-in power supply
Power consumption: Approx. 6 watts during continuous operation
Cable length 1 + 1 m, extendable up to 12 m
IP rating: IP 65
Laser module dimensions: approx. 18 x 100 mm
Mount Dimensions: approx. 125 h x 60 b x 80 mm
Service life: typically > 20,000 h
Temperature range: approx. -15° C to +45° C

Mounting and Line Length

The cylindrical housing, with a diameter of 18 mm, can be easily inserted into the specially designed, adjustable mount. The laser module is clamped in place to prevent damage to the housing. At the same time, the heat generated—which is very low in these modules—is dissipated via the clamping mechanism onto a metal surface. The crosshair position is easily adjusted by rotating the laser module within the mount. The sturdy aluminum mount can be adjusted for pan and tilt and securely clamped in place. The mounting base also features a guide pin to ensure precise concentricity during the adjustment process.

The electrical connection is kept very simple. Power is supplied by the included plug-in power supply. Simply plug it into a standard outlet and you’re done. The FloorPoint XT models are IP65-rated; only the power cable’s connector must be routed to a protected location.

If the laser is mounted vertically above an area, the cross size is determined by the distance and the projection angle. With angled mounting, the size can change significantly.

Cross Size

Depending on the application, modules with different beam angles can be selected to produce the desired length of the laser line. The wider the beam angle, the larger the laser cross. The following angles are available for our modules.

Angle Distance Cross Size (approx.)
15° 1 m 25 cm
45° 1 m 85 cm
55° 1 m 100 cm
ATTENTION! The cross size increases linearly with distance. At 2 m, the cross is therefore twice as large.

Notes

  • Observe the laser class!
  • You can find more information on laser safety here.
  • The module must remain mounted in the mount during operation.

We’re happy to answer any questions you may have regarding classification in your area.

Properties
Cross angle: 15 deg, 45 deg, 55 deg
TopFloor floor lasers are specified for a temperature range of –15 °C to +45 °C, which covers most unheated industrial and logistics halls. An extended range down to –30 °C is optionally available – relevant for chilled and frozen storage or permanently very cold outdoor areas. FloorPoint units are designed only for climate-controlled indoor environments (+10 to +30 °C). For strongly fluctuating temperatures we recommend the rail-mount variant (TF-*-RAIL) – it compensates for thermal movement of the carrier rail better than rigid wall mounting.
TopFloor projects a continuous line – ideal for paths, driving lanes, boundaries and stop lines. Available in power levels from 300 mW to 1000 mW and in red, green, blue and light blue. FloorPoint projects a cross or a dot – ideal for showing fixed single positions: pallet slots, gathering points, stacking positions, pick locations. FloorPoint uses 100 mW green and is designed for climate-controlled indoor environments (+10 to +30 °C). TopFloor is also suitable for unheated halls (–15 to +45 °C). Choose TopFloor for continuous markings and FloorPoint for single positions.
Yes. TopFloor floor lasers are specifically designed for 24/7 continuous operation. The typical service life is 25,000 to 40,000 hours – equivalent to roughly 3–5 years of uninterrupted use. The unit must be installed in the supplied mount, which also serves as a heat sink. Typical locations: industrial halls, warehouses, production areas. FloorPoint (cross marking, 100 mW) reaches around 8,000 hours due to its higher power density – about one year of continuous use. For pure 24/7 use the TopFloor models are the right choice; FloorPoint is better suited to daytime-only operation.
Yes. The DC variant (12–25 VDC) allows up to 10 TopFloor units to be connected to a single power supply. Cable runs of up to 100 m per unit are permitted. This is particularly useful in long halls with cascaded lines or dynamic setups, where multiple lasers are switched centrally via a PLC or KNX bus controller. Practical example: hall roof without distributed 230 V outlets – one central DC power supply feeds all lasers over long cable runs. For parallel alignment of the lines, line-length limiters (TF-LLL-60, TF-LLL-85) are available.
The right colour depends on the surface and the application. Green (520 nm) is the brightest option and the best choice on nearly all surfaces – the standard for walking and driving paths. Red (638 nm) conventionally signals danger and stop – ideal for forklift-proof stop lines, danger zones and safety distances in industrial halls. Blue (450 nm) stands out particularly well on light or yellowish floors, less so on grey concrete. Light blue (465 nm) delivers high contrast for special markings such as clean-room boundaries or inspection areas. On wooden floors or natural stone blue often provides the best contrast.
The optimal mounting height depends on the desired line length. Rule of thumb: line length ≈ 2× mounting height at a 90° lens angle, or 3× at 110°. Real-world values: 5 m height → approx. 10 m line (90°) or 15 m (110°). 8 m height → 16–24 m. For shorter lines (e.g. a stop line) 3–5 m height with a narrow angle is enough. Also consider ambient brightness: in halls with very bright daylight choose a higher power (500 mW or 750 mW); otherwise 300 mW is sufficient. The TopFloor mount allows fine-tuned alignment in all directions.
Instead of applying tape or paint to the floor, a floor laser projects a line or a cross onto the floor – typically from 5–10 m mounting height on the ceiling or wall. The marking is forklift-proof, abrasion-resistant, maintenance-free and permanently visible, even under heavy forklift traffic or cleaning machines. Unlike physical markings, virtual floor markings can be repositioned at any time – ideal for changing layout requirements in warehouses, industrial halls, production floors and logistics centres. TopFloor laser units run 24/7 over a typical service life of 25,000–40,000 hours.