Ushio HL63290HD 2200mW bright red laser diode 638nm

Q: Which well-known manufacturers of laser diodes exist?

The leading manufacturers of industrial laser diodes: Nichia (Japan) – market leader for green and blue laser diodes, highest efficiency and service life; well-known models include the NDG7575 (1 W green, 520 nm) and the NUBM series (blue). Sharp (Japan) – strong second source for visible wavelengths; models such as GH05C01B9G (1 W green). Osram Opto Semiconductors (Germany) – broad portfolio from 405 to 850 nm. Sony – mainly for display and show applications. Ushio – industrial high-power diodes. For red and infrared the choice is wider; for green and blue Nichia and Sharp are the dominant sources.

Q: How does beam shaping (collimation) of a laser diode work?

A bare laser diode emits a strongly divergent, elliptical beam – the bare diode does not produce a usable spot but rather a fanned-out cone. For practical use the beam must be collimated – reshaped into a parallel, directed beam. Standard solution: a collimator lens directly in front of the diode, mounted in an M9 × 0.5 housing (brass or aluminium). A single-lens optic turns the divergent beam into an approximately parallel beam. On high-quality collimators (e.g. our Colli-LA) we use an aspheric glass lens with AR coating, 5 mm aperture, focal length approx. 4 mm. For especially round beam profiles, correction optics can be added behind the collimator.

Q: Why does a laser diode need a heat sink?

Laser diodes dissipate typically 50–70 % of the electrical power as heat – only a fraction becomes light. A 1 W laser diode therefore generates 1.5–2 W of waste heat in the semiconductor chip. Without a heat sink the junction temperature climbs to critical levels within seconds and the diode fails thermally. Consequences: drastic wavelength shift (red-shifted), efficiency collapse, irreversible destruction. Rule of thumb: every additional 10 °C in junction temperature roughly halves the service life. Practice: mount the diode in a massive metal holder (brass or aluminium), the holder on a heat sink with thermal compound, and add a fan or thermal convection for &gt; 1 W.

Q: What is a constant-current driver for laser diodes?

A constant-current driver is an electronic circuit that regulates the current flowing through a laser diode to an exact value – independent of input voltage and temperature variations. This is necessary because a laser diode's optical output depends linearly on current, not on voltage. A simple voltage supply would, with small temperature or supply fluctuations, lead to large current and therefore optical-output swings – in the worst case destroying the diode. Good drivers offer: constant-current regulation, soft-start, over-temperature protection, ESD protection and often analog/TTL modulation for pulsed operation. Matching drivers are available in our „Laser drivers“ category.

Q: How is a bare laser diode driven correctly?

A bare laser diode needs a constant-current driver – not a simple voltage supply. Reason: the diode has a very steep current/light-output curve. Even 5 % current variation can destroy the diode. Concrete requirements: 1. Constant-current-regulated supply at the operating current specified in the datasheet (e.g. 1.6 A for Nichia NDG7575). 2. Soft-start (no abrupt current jump). 3. Protection against voltage spikes on the supply side. 4. Adequate heat dissipation via a heat sink (typically &lt; 30 °C junction temperature). 5. ESD protection during handling – bare diodes are extremely ESD-sensitive.

Q: What is a TO-9 laser diode?

TO-9 is a standardized package format for laser diodes – a cylindrical metal can with 9 mm diameter. The package contains the laser semiconductor chip, a protective cap with exit window and the electrical pins (typically 3). Benefits: uniform mechanical interface, good heat dissipation through the metal housing, easy integration into sockets and heat sinks. TO-9 is, alongside TO-5 (5.6 mm) and TO-18 (5.6 mm, older), the most common package for high-power laser diodes with &gt; 200 mW. Examples: Nichia NDG7575 (1 W green), Sharp GH05C01B9G (1 W green). A bare TO-9 diode is a pure component without collimator and without driver.

HL63290HD: Red Ushio high-power laser diode, 2200 mW, 638 nm, 9-mm housing, operating current approx. 2400 mA.

€92.82

Delivery time: In stock

Product number: HL63290HD

Ushio HL63290HD 2200mW bright red laser diode 638nm

HL63290HD – Red Ushio High-Power Laser Diode 2200 mW (638 nm): The most powerful red Ushio diode in the product line: 2.2 W optical power in a 9-mm housing, operating current approx. 2400 mA. Supplied as a bare diode—without a collimator or mount.

Red laser diode, approx. 638 nm, with 2200 mW
9-mm housing, operating current approx. 2400 mA
Diode only—accessories sold separately

Technical Specifications (Excerpt):

Power:	2200 mW
Wavelength:	approx. 638 nm
Housing:	9 mm
Operating current:	approx. 2400 mA

CAUTION! Laser diodes are extremely sensitive to static electricity! Use only in an antistatic environment! Multi-mode diode; the beam parameters without beam correction are in the range of blue Nichia/Osram diodes.

:	1.0000
:	Stück

Which well-known manufacturers of laser diodes exist?

The leading manufacturers of industrial laser diodes: Nichia (Japan) – market leader for green and blue laser diodes, highest efficiency and service life; well-known models include the NDG7575 (1 W green, 520 nm) and the NUBM series (blue). Sharp (Japan) – strong second source for visible wavelengths; models such as GH05C01B9G (1 W green). Osram Opto Semiconductors (Germany) – broad portfolio from 405 to 850 nm. Sony – mainly for display and show applications. Ushio – industrial high-power diodes. For red and infrared the choice is wider; for green and blue Nichia and Sharp are the dominant sources.

How does beam shaping (collimation) of a laser diode work?

A bare laser diode emits a strongly divergent, elliptical beam – the bare diode does not produce a usable spot but rather a fanned-out cone. For practical use the beam must be collimated – reshaped into a parallel, directed beam. Standard solution: a collimator lens directly in front of the diode, mounted in an M9 × 0.5 housing (brass or aluminium). A single-lens optic turns the divergent beam into an approximately parallel beam. On high-quality collimators (e.g. our Colli-LA) we use an aspheric glass lens with AR coating, 5 mm aperture, focal length approx. 4 mm. For especially round beam profiles, correction optics can be added behind the collimator.

Why does a laser diode need a heat sink?

Laser diodes dissipate typically 50–70 % of the electrical power as heat – only a fraction becomes light. A 1 W laser diode therefore generates 1.5–2 W of waste heat in the semiconductor chip. Without a heat sink the junction temperature climbs to critical levels within seconds and the diode fails thermally. Consequences: drastic wavelength shift (red-shifted), efficiency collapse, irreversible destruction. Rule of thumb: every additional 10 °C in junction temperature roughly halves the service life. Practice: mount the diode in a massive metal holder (brass or aluminium), the holder on a heat sink with thermal compound, and add a fan or thermal convection for > 1 W.

What is a constant-current driver for laser diodes?

A constant-current driver is an electronic circuit that regulates the current flowing through a laser diode to an exact value – independent of input voltage and temperature variations. This is necessary because a laser diode's optical output depends linearly on current, not on voltage. A simple voltage supply would, with small temperature or supply fluctuations, lead to large current and therefore optical-output swings – in the worst case destroying the diode. Good drivers offer: constant-current regulation, soft-start, over-temperature protection, ESD protection and often analog/TTL modulation for pulsed operation. Matching drivers are available in our „Laser drivers“ category.

How is a bare laser diode driven correctly?

A bare laser diode needs a constant-current driver – not a simple voltage supply. Reason: the diode has a very steep current/light-output curve. Even 5 % current variation can destroy the diode. Concrete requirements: 1. Constant-current-regulated supply at the operating current specified in the datasheet (e.g. 1.6 A for Nichia NDG7575). 2. Soft-start (no abrupt current jump). 3. Protection against voltage spikes on the supply side. 4. Adequate heat dissipation via a heat sink (typically < 30 °C junction temperature). 5. ESD protection during handling – bare diodes are extremely ESD-sensitive.

What is a TO-9 laser diode?

TO-9 is a standardized package format for laser diodes – a cylindrical metal can with 9 mm diameter. The package contains the laser semiconductor chip, a protective cap with exit window and the electrical pins (typically 3). Benefits: uniform mechanical interface, good heat dissipation through the metal housing, easy integration into sockets and heat sinks. TO-9 is, alongside TO-5 (5.6 mm) and TO-18 (5.6 mm, older), the most common package for high-power laser diodes with > 200 mW. Examples: Nichia NDG7575 (1 W green), Sharp GH05C01B9G (1 W green). A bare TO-9 diode is a pure component without collimator and without driver.